![A view from the rear A view from the rear](pictures/RR/02.jpg)
The rack sits on top of the roof
![Mounting Bracket Mounting Bracket](pictures/RR/03.jpg)
Mount to the gutter using 2 mounting brackets
![Wingnut and thread Wingnuts and tread](pictures/RR/04.jpg)
The threads accommodate a variety of cars.
![Suction cups Suction cups](pictures/RR/01.jpg)
The rubber suction cups ensure that the load is distributed and keeps the roof rack in place.
![Rubber Rubber on brackets](pictures/RR/05.jpg)
Rubber is supplied to prevent damage to the car.
![Transport by Mechanisatie Haarlemmermeer Transport](pictures/RR/06.jpg)
The 2 brackets can be
![Knocked down Knocked down](pictures/RR/07.jpg)
The roof rack can be taken apart and the whole package is not much bigger than the 2 sides.
![Legs Legs](pictures/RR/08.jpg)
The support legs can pivot inside the frame to allow for the curvature of the roof
- Frame material: Steel
- Feet material: Rubber
- Mounting Material: Included
- Easy storage: Yes
- Dimensions: TBA
- Weight: TBA
The roof rack consists of 2 mirrored sides were tubes are fixed in between. It is placed on the roof using 4 rubber feet that can swivel and fixed to the roof channel using 2 threaded rods that are attached to the roof with 2 clamps. This version can be disassembled for easy storage. The roof rack also accommodates several car models because the width can be adjusted slightly.